BackBack
Previous product
ECUMaster EMU Black Standalone Plug & Play Kit for 2JZGTE ECUMaster EMU Black Standalone Plug & Play Kit for 2JZGTE €1.535,95
Next product
Haltech Elite 2500 + Toyota Supra JZA80 2JZ (non VVTi) Plug 'n' Play Adaptor Harness Kit HT-151342 Haltech Elite 2500 + Toyota Supra JZA80 2JZ (non VVTi) Plug 'n' Play Adaptor Harness Kit HT-151342 €2.353,95
ECUMaster EMU Classic Plug & Play Kit for 2JZGTE
ECUMaster EMU Classic Plug & Play Kit for 2JZGTE
ECUMaster EMU Classic Plug & Play Kit for 2JZGTE
ECUMaster EMU Classic Plug & Play Kit for 2JZGTE
Click to enlargeClick to enlarge

ECUMaster EMU Classic Plug & Play Kit for 2JZGTE

€1.215,95

SKU: IP-EMUKIT
Description

 Plug and Play is a complete plug-in standalone ECU for the 1993-1998 Toyota Supra with manual transmission. This plug and play ECU will also operate an Aristo 2JZGTE engine so long as it is used with a manual transmission. Vehicles with USDM 2JZ engines will need to purchase an intake temperature sensor kit, as the MAF sensor is eliminated with the EMU. JDM 2JZGTE engines will make use of their existing IAT sensor. The Engine Management Unit controls all aspects of the engine, and offers failsafe strategies in case of sensor failures or other events. The EMU features more built-in value than anything else on the market, not requiring any external modules to drive up to 6 passive coils directly (up to 12 smart coils). The EMU also has an on-board wideband controller for use with a Bosch LSU 4.2 O2 sensor, 2 EGT channels, and can read a Flex Fuel ethanol content sensor directly. The built-in 4 bar MAP sensor further adds to the value of the EMU.

Common applications for the ECUMaster EMU are modified sports car and racing engines, motorcycles, boats, and stationary engines.

ECUMaster EMU Technical Details

  • 6 Fuel injector outputs (5A) (12 injectors in batch fire)
  • 6 AUX outputs (5A)
  • 6 Ignition outputs -Passive or active coils, software selectable (7A) (supports up to 12 cylinders)
  • 4 stepper motor outputs – bipolar/unipolar (1A)
  • 2 direct EGT input channels
  • 2 knock sensor inputs (supports flat response or resonant sensors)
  • Built-in wideband O2 controller for Bosch LSU 4.2
  • Built-in 4 bar MAP sensor
  • Built-in barometric pressure sensor
  • 4 Digital inputs VR/HALL – software selectable
  • 3 Dedicated analog inputs (TPS, CLT, IAT)
  • 4 Additional analog inputs (0-5V)
  • Compliance with ISO 7637
  • Supports 1-12 cylinders
  • Max RPM 16000
  • Injection time resolution 16us
  • Ignition advance resolution 0.5 deg
  • Knock sensing 1-20 kHz
  • Speed Density, Alpha-N algorithm
  • 16×20 VE fuel table, resolution to 0.1% VE
  • 16×20 Ignition table, resolution to 0.5 deg
  • 16×20 Target AFR table, resolution to 0.1 AFR
  • Injector voltage compensation
  • Coil dwell calibration
  • User calibrated IAT, CLT
  • PID idle control strategy
  • PID Boost Control, advanced strategies: per gear, per speed
  • Nitrous control with fuel and ignition modification tables
  • Aux outputs for fuel pumps, radiator fans, etc.
  • Motorsports features: launch control, gear dependent shift light,  flat shift ( gear change cut)
  • Logging available for over 100 parameters
  • Check engine light output
  • Full Flex Fuel capability with map blending (requires ethanol content sensor)
  • Advanced features available with additional modules: Drive By Wire throttle, Bluetooth adapter for using an Android device to display gauges
  • USB communication, no additional interface needed, uses standard USB cable (included)
  • The ECUMaster EMU comes with user friendly software with free firmware upgrades
  • 24 month warranty

PC Requirements

  • Windows 2000, XP, Vista, Windows 7, Windows 8
  • Screen resolution of at least 1024×768 16bit
  • CPU with a clock of at least 600MHz
  • USB port

What's Included

  • ECUMASTER EMU computer with 4 bar MAP sensor
  • 2JZGTE Plug and Play Adapter
  • USB cable
  • CD with software drivers and manuals
  • Laminated pinout of terminals on the ECUMaster EMU